Amaso eCeramic yesiTshayina kwiSicelo seRCS
Iimbonakalo
• Ukwakhiwa kwecandelo elifanayo
• Ubungakanani bokutya okuzinzileyo kunye nokungena komoya
• Ukuchasa okuphezulu (1800°C)
• Ukuchasana okuphezulu kokugqoka, ukutyumza kunye nokutshatyalaliswa kwe-thermal
• Ukwandiswa kwe-thermal encinci
• Ubumanzi obugqwesileyo kunye nokusebenza kakuhle kokuzalisa ngenxa yokuba singqukuva
• Elona nqanaba liphezulu lokulungiswa kwakhona kwisixokelelwano se-santi loop
Iinkqubo zeSicelo seSand Foundry
I-RCS (isanti eqatywe ngeResin)
Inkqubo yesanti yebhokisi ebandayo
Inkqubo yesanti yoshicilelo ye-3D (Bandakanya i-Furan resin kunye ne-PDB Phenolic resin)
Inkqubo yesanti ye-resin yokungabhaki (Bandakanya i-Furan resin kunye ne-Alkali phenolic resin)
Inkqubo yotyalo-mali/ Inkqubo yokufunyanwa kwewax elahlekileyo/Ukwenziwa ngokuchanekileyo
Inkqubo yobunzima obulahlekileyo/ Inkqubo yogwebu elahlekileyo
Inkqubo yeglasi yamanzi
Ipropati yeSanti yeCeramic
ICandelo leMichiza eliPhambili | Al₂O₃ 58-62%, Fe₂O₃<2%, | Al₂O₃ ≥53%, Fe₂O₃<3.5%, | Al₂O₃ ≥45%, Fe₂O₃<4%, |
Imilo yeenkozo | I-Spherical | I-Spherical | I-Spherical |
I-Angular Coefficient | ≤1.1 | ≤1.1 | ≤1.1 |
Ubungakanani obuyinxenye | 45μm -2000μm | 45μm -2000μm | 45μm -2000μm |
Ukuchasa | ≥1800℃ | ≥1790℃ | ≥1700℃ |
Unizi lolwapho kuyiwa khona | 1.5-1.6 g/cm3 | 1.5-1.6 g/cm3 | 1.5-1.6 g/cm3 |
PH | 7.2 | 7.2 | 7.2 |
Isicelo | Intsimbi, intsimbi, intsimbi | Intsimbi yekhabhoni, intsimbi | Intsimbi, iAluminiyam, ubhedu |
Ukwabiwa kobungakanani beenkozo
Umnatha | 20 | 30 | 40 | 50 | 70 | 100 | 140 | 200 | 270 | Ipani | Uluhlu lwe-AFS |
μm | 850 | 600 | 425 | 300 | 212 | 150 | 106 | 75 | 53 | Ipani | |
#400 | ≤5 | 15-35 | 35-65 | 10-25 | ≤8 | ≤2 | 40±5 | ||||
#500 | ≤5 | 0-15 | 25-40 | 25-45 | 10-20 | ≤10 | ≤5 | 50±5 | |||
#550 | ≤10 | 20-40 | 25-45 | 15-35 | ≤10 | ≤5 | 55±5 | ||||
#650 | ≤10 | 10-30 | 30-50 | 15-35 | 0-20 | ≤5 | ≤2 | 65±5 | |||
#750 | ≤10 | 5-30 | 25-50 | 20-40 | ≤10 | ≤5 | ≤2 | 75±5 | |||
#850 | ≤5 | 10-30 | 25-50 | 10-25 | ≤20 | ≤5 | ≤2 | 85±5 | |||
#950 | ≤2 | 10-25 | 10-25 | 35-60 | 10-25 | ≤10 | ≤2 | 95±5 |